No, not necessarily. The Hybrid Traveller automatically chooses between 4G and 5G depending on which mobile network gives the best and most stable connection where you are. So if the router shows 4G, it does not mean that it is faulty. In some places the 4G signal is stronger or more stable than 5G, even […]
We usually recommend leaving the Hybrid Traveller on Auto. The router then automatically chooses between 4G and 5G depending on which network works best where you are. When can you choose 4G or 5G manually? In some areas the 5G signal can be weak or unstable even though 5G is available. Then it sometimes works […]
On the Hybrid Traveller there is a small RESET hole next to the slot for the physical SIM card. Do this: Leave the router switched on. Use a SIM tool, a thin paper clip or something similar. Carefully press the RESET button through the small hole. Hold the button down for about 30 seconds. Release […]
Yes. The Hybrid Traveller can run on 230 V with the included power adapter. So you can use the router at home, at the campsite or in other places with an ordinary 230 V socket. The Hybrid Traveller can also run on 12 V, which makes it practical in motorhomes and caravans, for example. The […]
Yes. The Hybrid Traveller can be charged and powered via USB, which makes it easy to use at home and on the move. You can connect it, for example, to a suitable USB power adapter, a USB socket in the motorhome or caravan, or a power bank, as long as it delivers enough power. For […]
Yes. The Hybrid Traveller can be used while driving the motorhome, as long as the router has power and mobile reception. It can run on 12 V, USB or its built-in battery, so it is easy to use while driving too. When you drive through different areas, the router automatically switches mobile mast and, when […]
Yes. Several people and devices can use the Hybrid Traveller at the same time. For example, you can connect phones, tablets, computers, smart TVs and other Wi-Fi devices to the router at the same time. The Hybrid Traveller can handle more than 30 connected devices. The actual speed, however, depends on the mobile network coverage, […]
If the Hybrid Traveller does not start at all, first connect it to power and let it charge for a while before starting it again. Check that the charging cable and power adapter are connected properly, and try a different power socket. Then hold down the power button for a few seconds to start the […]
The lights on the Hybrid Traveller show, among other things, the router’s status, the network connection and the signal. The Mode light is especially important: Blue: The router is connected and working normally. Green: The router is active, but the connection or network type may differ. Red: The router has problems with the mobile connection […]
The Hybrid Traveller has no signal bars directly on the router. Instead, you check the signal strength in the router’s web interface or in the Hybrid Traveller app. There you can see information about the mobile connection and the signal. Remember that a strong signal does not always mean the fastest internet. The speed also […]
